Eaton Network-M2 - Page 108

 Settings
Contextual help of the web interface – 108
3.7.4.5 CLI commands
netconf
Description
Tools to display or change the network configuration of the card.
Help
For Viewer and Operator profiles:
netconf -h
Usage: netconf [OPTION]...
Display network information and change configuration.
-h, --help display help page
-l, --lan display Link status and MAC address
-4, --ipv4 display IPv4 Mode, Address, Netmask and Gateway
-6, --ipv6 display IPv6 Mode, Addresses and Gateway
-d, --domain display Domain mode, FQDN, Primary and Secondary DNS

For Administrator profile: