Eaton Network-M3 - Page 122

Settings
Contextual help of the web interface – 122
Firewall - ICMP V4 State : Active
Address Filter : Empty
Active / Inactive
IP address
Firewall - ICMP V6 State : Active
Address Filter : Empty
Active / Inactive
IP address
3.7.6.8.1 For other settings
3.7.6.9 Access rights per profiles
Administrator Operator Viewer
Firewall
3.7.6.9.1 For other access rights
3.7.6.10 Save and Restore
SRR section Interface SRR sub section Settings Sub settings Possible values
ICMP Firewall ETH x ICMP V4 Enabled true/false
V6 Enabled true/false
HTTP_REDIREC
T
HTTP_REDIREC
T
Enabled true/false
port Number : refer to default settings
an possible parameters for
constraints.
address (White list) xx.xxx.xx.xx
SECURE_WEB SECURE_WEB Enabled true/false
port Number : refer to default settings
an possible parameters for
constraints.
address (White list) xx.xxx.xx.xx
SSH SSH Enabled true/false
port Number : refer to default settings
an possible parameters for
constraints.
For other settings, see the Information>>>Default settings parameters section.
For other access rights, see the Information>>>Access rights per profiles section.