Eaton Network-M3 - Page 200

Saving/Restoring/Duplicating Network module configuration settings
Servicing the Network Management Module – 200
4.16.1.3 Modifying JSON file examples
4.16.1.3.1 Modifying sensitive data
To change sensitive data, plain text must be filled with the new valueand the Cyphered entry (if existing) must be removed:
4.16.1.3.2 Adding local users
Adding or modifying local users is not yet available, only the predefined account (main administrator) can be modified.
4.16.1.3.3 Modifying SNMP settings
Original file: Modified file:
SNMP disabled SNMP enabled on port 161
SNMPv1 disabled
SNMPv3 enabled
2 x accounts
1 x read only user (enabled) with Auth-Priv security level and passwords
1x read write user (enabled) with Auth-Priv security level and passwords
1 x active trap
When restoring the file, the corresponding setting will not be set.
This may lead to restoration failure if corresponding setting was not previously set with a valid value.