Eaton Network-M3 - Page 233

Default settings and possible parameters
Information – 233
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RADIUS Configure
Active – No
Retry number – 0
Primary server
Name – blank
Secret – blank
Address – blank
UDP port – 1812
Time out – 3
Secondary server
Name – blank
Secret – blank
Address – blank
UDP port – 1812
Time out – 3
Users preferences
Language –
English
Temperature unit – °C (Celsius)
Date format – m/d/Y
Time format – hh:mm:ss (24h)
Configure
Active – Yes/No
Retry number – 0 to 128
Primary server
Name – 128 characters maximum
Address – 128 characters maximum
Secret – 128 characters maximum
UDP port – 1 to 65535
Time out – 3 to 60
Secondary server
Name – 128 characters maximum
Address – 128 characters maximum
Secret – 128 characters maximum
UDP port – 1 to 65535
Time out – 3 to 60
Users preferences
Language – English, French, German,
Italian, Japanese, Russian, Simplified
Chinese, Spanish, Traditional Chinese
Temperature unit – °C (Celsius)
Date format – MM-DD-YYYY
Time format – hh:mm:ss (24h)
Default settings and possible parameters - Network & Protocol
Default setting Possible parameters
IPV4 Mode — DHCP Mode — DHCP/Manual (Address/Netmask/Gateway)
IPV6 Enable — checked
Mode — DHCP
Enabled — Active/Inactive
Mode — DHCP/Manual (Address/Prefix/Gateway)
DNS/DHCP Hostname — device -[MAC  address]
Mode — DHCP
Hostname — 128 characters maximum
Mode :DHCP/Manual (Domain name/Primary DNS/
Secondary DNS)
Ethernet Configuration — Auto negotiation Configuration — Auto negotiation - 10Mbps -Half
duplex - 10Mbps -Full duplex - 100Mbps - Half
duplex - 100Mbps -Full duplex - 1.0 Gbps - Full
duplex
HTTPS Port — 443
Disable Port 80 (http) - Not disabled
Port — x-xxx
Disable Port 80 (http) - Disabled