F16 Warning Voltage out of range Voltage in range -
F17 Warning Input waveform is not OK Input waveform is OK -
F18 Warning Voltage out of range Voltage in range -
F1A Warning On alternate source - -
7.5.4.3 Good
Code Severity Active message Non-active message Advice
F05 Good Source 1 used to power the load Source 1 not used to power the load -
F0A Good Source 2 used to power the load Source 2 not used to power the load -
F19 Good On preferred source - -
Alarms with a severity set as Good are not taken into account into the counter of active alarms.
To Next Page
Loading...
