Eaton Network-M3 - Page 85

Settings
Contextual help of the web interface – 85
•
•
•
•
•
•
•
Server IP/Hostname – Enter the host name or IP address of the SMTP server used to transfer email messages in the SMTP
Server field.
Port
Default sender address
Hide the IP address from the email body–Disabled/Enabled
If Enabled, it will force this setting to Enabled in the Email notification settings.
Secure SMTP connection–Verify certificate authority
SMTP server authentication– Username/Password ( Read below note for Gmail Configuration regarding the password )
Select the SMTP server authentication checkbox to require a user name and a password for SNMP authentication, enter the
Username and the Password.
Save and test server configuration
3.7.1.6 Default settings and possible parameters - General
Default setting Possible parameters
System details Location—empty
Contact—empty
System name—empty
Time & date settings—Manual (Time zone:  Europe/
Paris)
Location — 31 characters maximum
Contact— 255 characters maximum
System name— 255 characters maximum
Time & date settings—Manual (Time zone: selection on
map/Date) / Dynamic (NTP)
1.
2.
3.
4.
5.
6.
7.
Gmail Users
Google no more allow the card to send email using your Gmail account password, but requires you to use a
dedicated "App passwords" instead.
To proceed, you need first to enable a 2-Step Verification on your Google account.
Then you need to follow these steps to generate an "App password" that you'll be required to configure SMTP
server authentication in the card (instead of your google account usual password):
Go tohttps://security.google.com/settings/security/apppasswordsand sign in to your account.
ChooseMailfrom the list of available apps.
ChooseOtherfrom the device list.
Enter yourCustom Name. You can put any name such as ”my-card" in it.
Click theGeneratebutton.
Copy the password and put in the password field. ( The same password can be reused across multiple
cards)
Be careful, this password cannot be recovered after clicking the "Done" button. If lost, you'll have to
regenerate a new password & reapply it in the settings.
Click theDonebutton, and that’s it.