Eaton Network-M3 - Page 88

Settings
Contextual help of the web interface – 88
time -h
Usage:time[OPTION]...
Display time and date, change time and date.
-h,--helpdisplayhelppage
-p,--printdisplaydateandtimeinYYYYMMDDhhmmssformat
-s,--set<mode>
Modevalues:
-setdateandtime(formatYYYYMMDDhhmmss)
manual<dateandtime>
-setpreferredandalternateNTPservers
ntpmanual<preferredserver><alternateserver>
- automaticallysetdateandtime
ntpauto
Examples of usage:
-> Set date 2017-11-08 and time 22:00
time--setmanual201711082200
-> Set preferred and alternate NTP servers
time--setntpmanualfr.pool.ntp.orgde.pool.ntp.org
Examples of usage
-> Set date 2017-11-08 and time 22:00
time --set manual 201711082200
-> Set preferred and alternate NTP servers
time --set ntpmanual fr.pool.ntp.org de.pool.ntp.org
3.7.1.8.1 For other CLI commands
3.7.1.9 Save and Restore
SRR section SRR sub section Settings Sub Setttings Possible values
System details card identification name String: refer to default
settings and possible
parameters for constraints.
contact String: refer to default
settings and possible
parameters for constraints.
location String: refer to default
settings and possible
parameters for constraints.
Time and Date settings date ntp enabled true/false
getServersFromDhcp true/false
servers preferredServer *
See the CLI commands in the Information>>>CLI section.