1 DC1 device series
1.1 Introduction
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 9
1 DC1 device series
1.1 Introduction
Due to their ease of use and high reliability, DC1 PowerXL™ variable
frequency drives are ideal for general applications involving three-phase
motors. In addition, an integrated radio interference suppression filter and a
flexible interface ensure that the inverters meet a number of important
needs in the machine building industry when it comes to the optimization of
production and manufacturing processes.
For installations in control panels, devices with a performance range of 0.37
(for 230 V) to 22 kW (for 400 V) are available in a compact and sturdy design
featuring three available sizes (FS1, FS2, FS3, FS4) and a degree of
protection of IP20.
For distributed local installations, there are three sizes covering a
performance range of 0.37 (for 230 V) to 7.5 kW (for 400 V) and featuring a
degree of protection of IP66. These models come in two versions: with and
without local controls. These local controls include a setpoint potentiometer,
a selector switch for switching operating directions, and a lockable main
switch on the mains side.
The computer-based drivesConnect parameter configuration program
ensures data integrity and reduces the time required for commissioning and
maintenance.
In addition, the comprehensive accessories available increase the inverters’
flexibility in all scopes of application.
IP20 degree of
protection
IP66 degree of protection IP66 degree of protection, with local
controls
Figure 1: Designs and enclosure versions
To Next Page
Loading...
