EasyManua.ls Logo

Eaton PowerXL DC1 - 6 Technical Data; General Rating Data

Eaton PowerXL DC1
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Technical Data
6.1 General rating data
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 129
6 Technical Data
6.1 General rating data
Technical data Symbol Unit Value
General
Standards EMC: EN 61800-3:2004+A1-2012
Radio interference: EN 55011: 2010
Safety: EN 61800-5: 2007
Degree of protection: EN 60529: 1992
Certifications and manufacturer’s declarations on conformity CE, UL, cUL, c-Tick, UkrSEPRO, Gost-R
Production quality RoHS, ISO 9001
Climatic proofing ρ
w
% < 95 %, average relative humidity (RH),
non-condensing (EN 50178)
Ambient air temperature
Operational
IP20 (NEMA 0) ϑ °C -10 - +50 (frost-free and condensation-free)
-10 - +45 for DC1-12011… and DC1-32011…,
for UL compliance over a period of 24 hours
IP66 (NEMA 4X) ϑ °C -10 - +40 (frost-free and condensation-free)
Note:
Operation within a temperature range of 40 to 50 °C
does not conform to UL listing.
Storage ϑ °C -40 - +60
MTBF (mean time between failures) Years 157
Electrostatic discharge (ESD, EN 61000-4-2:2009 U kV ±4, contact discharge
±8, air discharge
Fast transient burst (EFT/B, EN 61000-4-4: 2004) U kV ±1, at 5 kHz, control signal terminal
±2, at 5 kHz, motor connection terminals,
single-phase mains connection terminals
±4, at 5 kHz, three-phase mains connection terminals

Table of Contents

Other manuals for Eaton PowerXL DC1

Related product manuals