6 Technical Data
6.2 Specific rated operational data
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 133
6.2 Specific rated operational data
The following tables list the specific rated operational data for the individual
DC1 series based on the corresponding rated operational current.
Examples
DC1-1D 2D3 …
Rated operational current (2D3 ≙ 2.3 A)
DC1 series
(1D = Single-phase mains connection, 115 V, with voltage doubler)
DC1-12 7D0 FB …
Power section characteristics
NN = without radio interference suppression filter, without brake chopper
FN = with radio interference suppression filter, without brake chopper
NB = without radio interference suppression filter, with brake chopper
FB = with radio interference suppression filter, with brake chopper
Rated operational current (7D0 ≙ 7.0 A)
DC1 device series
(12 = single-phase mains connection (230 V)
DC1-32 046 …
Rated operational current (046 ≙ 46 A)
DC1 device series
(32 = three-phase mains connection, 230 V)
(34 = three-phase mains connection, 400 V)
To Next Page
Loading...
