Eaton PowerXL DC1 - Operation; 4.1 Checklist for commissioning

1 DC1 device series
1.6 Voltage categories
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 25
1.6 Voltage categories
DC1 variable frequency drives are divided into three voltage categories:
• 115 V: 110 - 115 V ±10 %  DC1-1D
• 200 V: 200 - 240 V ±10 %  DC1-12…, DC1-32…
• 400 V: 380 - 480 V ±10 %  DC1-34…
• DC1-1D…
• Single-phase mains connection, rated operating voltage of 115 V
with internal voltage doubler
• U
LN
= 1~, 110 - 115 V ±10 %, 50/60 Hz
• Ie = 2.3 - 5.8 A
• Motor: 0.37 - 1.1 kW (230 V, 50 Hz), 1/2 - 1-1/2 HP (230 V, 60 Hz)
Figure 8: DC1-1D…
• DC1-12…
• Single-phase mains connection, rated operating voltage 230 V
• U
LN
= 1~, 200 - 240 V ±10 %, 50/60 Hz
• I
e
= 2.3 - 16 A
Motor: 0.37 - 4 kW (230 V, 50 Hz), 1/2 - 5 HP (230 V, 60 Hz)
Figure 9: DC1-12…
For more information on how to run single-phase AC motors
using the DC1 variable frequency drive, please refer to
Application Note AP040037EN, “DC1 Variable Frequency Drives
– Operating Single Phase Motors”.
ftp://ftp.moeller.net/DRIVES/POWERXL/01_APPLICATION_NOTE/
Deutsch/DC1/AP040037DE_DC1_Betrieb_von_Einphasenmotoren.pdf
a
Motor
L1
N
PE
U
V
W
L1/L
L2/N


M
3 ∼
I
e
BRDC+
FS1, FS2
Brake Chopper
(FS2)
230 V (U
LN
= 1 ~ 230 V)
Motor
L1
N
PE
U
V
W
L1/L
L2/N


M
3 ∼
I
e
BRDC+
FS1, FS2, FS3
Brake Chopper
(FS2, FS3)
230 V (U
LN
= 1 ~ 230 V)
EMC Filter