2 Engineering
2.1 Introduction
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 35
2 Engineering
2.1 Introduction
This chapter describes the most important features in the energy circuit of a
magnet system (PDS = Power Drive System), which you should take into
consideration in your project planning.
It contains instructions that must be followed when determining which
device to use with which rated motor output, as well as when selecting
protection devices and switchgear, selecting cables, cable entries, and
operating the DC1 variable frequency drive.
All applicable laws and local standards must be complied with when planning
and carrying out the installation. Not following the recommendations
provided may result in problems what will not be covered by the warranty.
To Next Page
Loading...
