0 About this manual
0.1 Target group
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 5
0 About this manual
This manual (MN04020003Z-DE) contains specific information designed to
enable you to select and connect a DC1 variable frequency drive. It covers all
DC1 frame sizes.
Any differences between and special characteristics of the various models
will be noted accordingly. Accessories that can be used to modify the DC1
variable frequency drive according to your specific needs will be listed where
applicable.
0.1 Target group
The content of MN04020003Z-EN manual is written for engineers and
electricians. Electrical engineering and physics-related knowledge and skills
will be required in order to be able to commission the corresponding devices.
We assume that you have a good knowledge of engineering basics and that
you are familiar with handling electrical systems and machines, as well as
with reading technical drawings.
0.2 List of revisions
The following significant amendments have been introduced since previous
issues:
￫
“Parameter manual”
A separate manual – MN04020004Z-EN (“Parameter Manual”) –
goes over how to configure the parameters for DC1 variable
frequency drives and provides application examples as well.
This manual is available on the Eaton website at:
http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/
Kundensupport/DownloadCenter/index.htm
Customer support Download Center –
Documentation
In the Quick Search box, enter “MN04020004Z”.
Then click on Search.
Publication
date
Page Subject New Modified Deleted
04/16 Manual split into this installation manual
(= MN04020003Z-EN) and a parameter
configuration manual (= MN04020004Z-EN)
as well as revised in general
✓
12/13 Completely revised
✓✓
10/12 Initial issue
To Next Page
Loading...
