EasyManua.ls Logo

Eaton PowerXL DC1 - 1.12 Charging the internal DC link capacitors; 1.13 Service and warranty

Eaton PowerXL DC1
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 DC1 device series
1.5 Description
24 DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com
1.5.2 IP66 degree of protection (FS1 to FS3)
The following drawing serves as an example showing the designations used
for the elements in DC1 variable frequency drives with an IP66 degree of
protection and a size of FS1.
Figure 7: Description (IP66)
a Local controls with connection (DC1-…-A6SN only)
b Keypad with 5 control buttons and LED display
c Control terminal (plug-in)
d Connection terminals in power section
e Nameplate
f Fixing holes
g Heat sink
h Opening for cable gland
i Communication interface (RJ45)
j Cover for connection terminals, featuring info cards
The info cards are found on the inside of the lower cover , which features
three additional knockouts for cable glands leading to the control section.
L2N
L3
U
V
W
L1N
1 2
3
4 5 6
7
8 9 10
1 2 3 4 5 6
7 8 9 10 11

Table of Contents

Other manuals for Eaton PowerXL DC1

Related product manuals