3 Installation
3.6 Electrical Installation
DC1 Variable Frequency Drive 04/16 MN04020003Z-EN www.eaton.com 79
3.6.1.2 Terminals in power section for units with IP66 degree of protection
On units with an IP66 degree of protection, the connection area is located
behind the lower enclosure cover.
To open the cover, release the two latches by turning them
counterclockwise (90 degrees) so that they are in a vertical position [1].
Once the latches are released, you can lift the cover off [2].
Figure 42: Removing the lower housing cover
③
Control
PZ 2
1
2
To Next Page
Loading...
