Edwards STP-iS1607 Series User Manual

Declaration of Conformity
This product has been manufactured under a
quality management system certified to ISO9001:2015
.
This declaration is based on the requirements of ENISO17050-1 and the relevant directives.
VI
-
DOC
-
94
-
00
2
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Edwards Japan Limited
1078-1,Yoshihashi,
Yachiyo-shi
Chiba, 276-8523
Japan
Documentation Officer
Jana Sigmunda 300
Lutín , 78349
Czech Republic
T: +42(0) 580 582 728
documentation@edwardsvacuum.com
Product Name:
T
urbomolecular pump
Model Number:
STP
-
i
S
16
07
series
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
Note: The safety objectives of the Low Voltage Directive 2014/35/EU were
complied with in accordance with Annex 1 No. 1.5.1 of this directive.
2014/30/EU
Electromagnetic compatibility (EMC) directive
Class A Emissions, Industrial Immunity
2011/65/EU
Restriction of certain hazardous s
ubstances (RoHS)
d
irective
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk
reduction
EN 1012
-
2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 61326
-
1:2013
Electrical
equipment for measurement, control and laboratory use. EMC
requirements
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 11
th
-Oct-2022
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
Martin Tollner
President, Semiconductor Chamber Solutions
Chelmsford
Petr Tochacek
General Manager, PC Yachiyo
Yachiyo

Edwards STP-iS1607 Series Specifications

General

Brand	Edwards
Model	STP-iS1607 Series
Category	Water Pump
Language	English