Edwards STP-iS1607 Series - STP Pump Specifications and Naming Conventions

STP-iS1607 Series Turbomolecular Pump
MT-94E-001-C
Page 9
1
INTRODUCTION
1.8 STP pump specification
External appearance, installation and unpacking method differ depending to the STP pump
specification. Refer to the followings:
Standard type
(Without anticorrosion
treatment type)
Corrosion resistant type
STP-iS1607/STP-iS1607C/STP-iS1607B
STP-iS1607S/STP-iS1607CS/STP-iS1607BS
Naming convention:
• "C" or “B” following a pump model name indicates a corrosion resistant
*1
type.
(e.g. STP-iS1607C)
• "B" following a pump model name indicates corrosion resistant
*1
and high-emissivity
*2
coating
type.
(e.g. STP- iS1607B).
• "S" following a pump model name indicates a compatible
*3
type.
(e.g. STP-iS1607CS)