EG4 18KPV - Monitoring, Operation, and Updates; Monitoring Setup and App Usage

56
8 Monitor System Setup
8.1 Wi-Fi/4G Dongle Connection
A Wi-Fi/4G dongle can be used to monitor the inverter and remotely view the monitoring data on a com-
puter or smart phone. You can attach this module by plugging it in to the side of the inverter and securing it
with the 4 Phillips head screws. (See image below)
View data on smart phone:
A QR code with a link to our website with app installation steps can be found on the side of the
inverter.
Or visit our downloads page at www.eg4electronics.com for more information.