To Next Page

To Previous Page

10 Smartphone App Setup

You need to register for a monitoring account and set the

Wi-Fi password for the Wi-Fi dongle before using EG4's

monitoring system.

1. Register your account

Visit https://monitor.eg4electronics.com/ or

download the ‘EG4 Monitor' app to register for an

end-user account. Please contact sup-

port@eg4electronics.com for distributor or in-

staller accounts.

2. When registering the account, provide the following

information:

a. Customer code: This is the code for a distributor or in-

staller. Please contact your distributor or installer to ob-

tain this code.

b. Dongle SN: The serial number is attached to the Wi-

Fi/LAN shell.

c. Dongle PIN: PIN is attached to the Wi-Fi/LAN shell be-

low the SN.

3. Set your Wi-fi password

a. Plug in the Wi-Fi dongle, and power on the inverter.

b. Wait until the INV LED on the Wi-Fi module is solid on, then connect your

phone to the Wi-Fi hotspot. The hotspot name is the same as the Wi-Fi don-

gle serial number. (See image on left)

c. Open the app. Click on "DONGLE CONNECT".

Click the Yellow refresh button to display a list of

available networks. Select your wireless network

name and enter your password.

d. After clicking Home Wi-Fi Connect, the Wi-Fi dongle

will reset. After you set the correct password, three

lights will be solid on, which means the inverter is

connected to the server. You can then return to the

begin monitoring your system.

Other manuals for EG4 18KPV

Questions and Answers:

Need help?

Do you have a question about the EG4 18KPV and is the answer not in the manual?

General