To Next Page

To Previous Page

4. Select the Wi-Fi network you want to connect to and the click “OK.” Input the Wi-Fi password

and click “Save.”

5. After saving your settings, the dongle will restart. After you set the password, three lights will be

solid on, which means the inverter is connected to the server. You can now input your account

8.3.2 Dashboard (Monitor Tab)

Once your account is created, log in and you will be brought to the main page (Monitor tab) of the monitor-

ing interface.

Name

Description

Select station first

Select which station to view, and then select which unit/dongle to view by choosing a serial

number from the dropdown list. Note: Unchecking the box will only display serial numbers

linked to the account.

Solar Yielding

Shows power generated by the solar panels (for AC coupled inverters it shows the power

generated by the on-grid inverter). The PV CT clamp will have to be installed to be able to

show the data correctly. When the picture of the solar yielding is clicked, it will display how

the solar energy has been used that day. A second click will show the totals since

commissioning.

Battery Dis-

charging/Charging

Shows the charge and discharge energy from the battery/batteries. When the battery picture

is clicked, the display will switch between battery discharging and battery charging, showing

totals for that day and since commissioning.

Feed-in En-

ergy/Import

Shows energy exported to grid for that day and since commissioning. When the picture is

clicked, it shows energy imported from the grid for that day and since commissioning.

Consumption

Shows the total energy consumption of the property for that day and since commissioning.

System information

Displays power sources and energy flow, voltage, and amperage from lines to loads. Clicking

the button beside the status will refresh the information to reflect real time data.

Note: When the battery’s color is yellow or red it means there is a warning or fault with the

battery.

Start Quick Charge

Clicking this will direct the inverter to charge batteries faster for one hour. It will then default

back to its original setting.

Other manuals for EG4 18KPV

Questions and Answers:

Need help?

Do you have a question about the EG4 18KPV and is the answer not in the manual?

General