eKey Home - Disabling Bluetooth; Coupling Additional Mobile Devices

Usage of the finger scanner with the app en│29
The Bluetooth functionality can be disabled. Bluetooth functionality is set
to enabled in the default settings.
Step
Instruction
1st
Start the
ekey home app
.
2nd
Select ADMINISTRATION.
3rd
Select SYSTEM STATUS.
4th
Under BLUETOOTH SETTINGS, enable the setting Disable
Bluetooth after 15 minutes.
This setting disables Bluetooth on the finger scanner after 15 minutes if
one of the following situations arises:
□ No mobile device is connected
□ At least one finger has been stored
You can re-enable Bluetooth by entering the security code in the control
panel.
See Entering the security code, page 35.
You can couple additional mobile devices with the Bluetooth finger
scanner using the 6-digit admin/user coupling code you have chosen.
See Storing the user coupling code, page 31.
Step
Action
Description
Display
1st
Start the
ekey home app
.
-
2nd
Follow the
instructions
on the
display
Couple the mobile device with the
Bluetooth finger scanner using the
6-digit admin/user coupling code
you have chosen.
The status
LED lights
up blue, the
left-hand
function
LED lights
up orange.
The coupling between the Bluetooth finger scanner and the mobile device
is established.
You can now start programming and managing the finger scan access
control system via the ekey home app.
Disabling
Bluetooth
Coupling
additional
mobile devices