eKey Home - Via the App

Resetting the system to default settings en│69
The process of resetting to the default settings is initiated via the app.
NOTICE
Only for Bluetooth finger scanners: The app can only be used for
resetting in the case of Bluetooth finger scanners.
Step
Instruction
1st
Start the
ekey home app
.
2nd
Connect to the Bluetooth finger scanner.
3rd
Select ADMINISTRATION.
4th
Select RESET SYSTEM.
5th
Confirm that you wish to carry out the reset by selecting
Continue.
The system has been reset to its default settings. You can now
recommission the system.
See step 3 of Commissioning the system, page 19.
Via the app