eKey Home - Protecting the System in the Event that the Mobile Device Is Lost

32│en Usage of the finger scanner with the app
If you have lost your mobile device, you can use a second mobile device
to change the admin/user coupling code. This new admin/user coupling
code will stop any connections being established using the lost mobile
device.
Step
Instruction
1st
Start the
ekey home app
on the second mobile device.
2nd
Couple the second mobile device with the Bluetooth finger
scanner.
3rd
Select ADMINISTRATION.
4th
Select CHANGE SECURITY CODES.
5th
Enter a new 6-digit admin/user coupling code.
6th
Confirm by selecting Change (Android) or Done (iOS).
The admin/user coupling code in the system has now been changed.
This means that the lost mobile device is no longer able to establish a
connection to the Bluetooth finger scanner. Your system is protected
against access by unauthorized persons once again.
Protecting the
system in the
event that the
mobile device
is lost