Safety information en│5
Safety information
This product is an access control system with a biometric or mental
identification feature (finger scan or pin code). The system is comprised of
a registration unit and control panel. It is available in various models and
component combinations.
The biometric access control system detects the characteristics (minutiae)
of the fingerprint contours, compares them to the biometric information
saved from the reference fingerprint image, and opens the door in the
event of a match. One variant allows the user to be identified and the
door opened by means of an RFID transponder.
The mental access control system detects the pin codes which are
entered, compares them to the stored reference pin codes, and opens the
door in the event of a match.
The system is primarily designed for opening house doors, apartment
doors, and garage doors in homes and businesses.
To ensure proper use, the ekey system must be installed in accordance
with the mounting instructions and the wiring diagram. The installation
must be performed in full and by a professional. The electrical engineer
who installs the equipment must approve the ekey system for use, as well
as any accessories that are installed.
The ekey system is suitable for use as outlined in these operating
instructions. Any other kind of use is deemed improper use.
Safe operation and function of the devices can be impaired in the
following situations. Liability due to malfunctioning is transferred to the
operator/user in such cases:
□ The system devices are not installed, used, maintained, or
cleaned in accordance with the instructions
□ The system devices are not used within the scope of proper use
□ Unauthorized modifications are carried out on the system
devices by the operator
To Next Page
Loading...
