68│en Resetting the system to default settings
Resetting the system to default settings
All authorizations are permanently deleted and the system settings are
reset to their defaults. Your system is then in the condition in which it was
delivered to you once more.
NOTICE
Effect of resetting to the default settings:
□ All identification methods are deleted irretrievably. The admin
code is reset to its default setting of 9999 using the code pad.
□ The security code is set to 99.
□ The control panel and registration unit are no longer coupled
together.
□ The switching duration is set to 3 s.
□ The LED intensity of the finger scanner is reset to 1 (LED
dimmed).
□ For a Bluetooth finger scanner, the admin coupling code is reset
to the default setting of 9999.
□ The brightness threshold of the automatic back-illumination is
reset to 10% and the brightness value of the back-illumination
to 100% using the code pad.
□ The acoustic and optical signaling that indicates when a button
has been pressed, and the acoustic signal for door opening, are
both enabled again using the code pad.
You can reset the system to its default settings either via the app
(Bluetooth finger scanners only), the control panel, or the code pad. Use
whichever device is most easily accessible.
To Next Page
Loading...
