eKey Home - Opening a Door

Usage of the finger scanner with the control panel menu en│47
The primary purpose of the product is to open doors. This can be carried
out using the finger scanner, an RFID transponder, or the digital input.
The system is in normal mode.
Using the finger scanner
Step
Action
Description
Display
1st
Swipe a stored finger
over the sensor.
The status
LED lights up
green.
The status
LED lights up
red.
The finger was not
recognized. Repeat step
1.
-
2nd
No action
required.
The door opens.
The status
LED lights up
blue.
The system is in normal mode.
Opening a
door