Introduction to the system en│7
Introduction to the system
Fig. 1: Overview of the system
1 Connecting cable from registration unit to control panel
2 Power supply
3 ekey registration unit
4 ekey control panel
5 Distribution box
6 Motorized lock
7 Cable transfer
8 Connecting cable from control panel to motorized lock
The system is comprised of a registration unit and control panel.
The biometric access control system detects the characteristics (minutiae)
of the fingerprint contours, compares them to the biometric information
saved from the reference fingerprint image, and opens the door in the
event of a match. One variant allows the user to be identified and the
door opened by means of an RFID transponder.
The mental access control system detects the pin codes which are
entered, compares them to the stored reference pin codes, and opens the
door in the event of a match.
□ One registration unit
□ RFID transponder for finger scanners with RFID functionality
□ One control panel
□ Operating instructions, mounting instructions, wiring diagram
□ Optional: matching accessories (cable transfer, power supply,
connecting cable, covers, etc.).
To Next Page
Loading...
