eKey Home - Storing User Codes

62│en Usage of the code pad with shortcuts
The system enables a maximum of 99 user codes to be stored.
A user code is any pin code which is used for triggering an action on the
control panel, e.g., opening a door. The user code may contain between 4
and 8 digits. The digits cannot all be the same; at least one of them must
be different.
NOTICE
Selecting a user code: To ensure the access control system remains
secure, please remember the following when selecting a user code:
□ Use long user codes
□ Use only numbers if possible
□ Do not use trivial codes
User codes are stored via the control panel main menu.
Enter the security code to access the main menu.
See Entering the security code, page 35.
The system displays the main menu.
Step
Action
Description
Display
1st
Press < or > until Eu
is displayed.
2nd
Press OK.
3rd
Press < or > to select
the user number. If
the user has already
stored a user code, a
point lights up on the
right.
4th
Press OK.
5th
Press < or > to select
the relay.
od = double relay
(relay 1 + 2). Relay
selection is available
on control panels with
more than one relay.
Storing user
codes