54│en Usage of the code pad with shortcuts
Usage of the code pad with shortcuts
The devices must have been commissioned before you start your system
administration.
See Commissioning the system, page 19.
The system is in normal mode. The keypad is used for programming the
system.
Entering the admin code grants you access to the Admin menu. The
Admin menu is used to configure the system. The default admin code is
9999.
ATTENTION
Change the admin code immediately: The admin code enables access
to the main menu.
If you do not change the admin code, it may be possible for unauthorized
persons to get into your Admin menu and then gain access to your
premises.
Change the default admin code immediately after commissioning! Choose
a new admin code and keep it secret.
See Changing the admin code, page 56.
To Next Page
Loading...
