eKey Home - Managing Multiple Bluetooth Finger Scanners

30│en Usage of the finger scanner with the app
The ekey home app allows you to manage multiple Bluetooth finger
scanners. To switch between two Bluetooth finger scanners, you must
reset the coupling between the Bluetooth finger scanner and the mobile
device.
NOTICE
Relay name and user images are deleted: When you reset the
coupling, any relay names and user images that have been stored will be
deleted. User names and authorizations will remain stored on the
Bluetooth finger scanner.
Step
Instruction
1st
Start the
ekey home app
.
2nd
Select ADMINISTRATION.
3rd
Select RESET COUPLING.
4th
Confirm that you wish to carry out the reset by selecting
Continue.
The coupling between the Bluetooth finger scanner and the mobile device
is reset.
You can now couple another Bluetooth finger scanner.
See Coupling additional mobile devices, page 29.
Managing
multiple
Bluetooth
finger
scanners