eKey Home - Page 56

Usage of the code pad with shortcuts en│55
The system is in normal mode.
Step
Action
Description
Display
1st
Press ✓ to start the
process of entering
the admin code.
The status
LED lights up
yellow on the
left.
2nd
Enter the admin code
on the keypad.
-
-
3rd
Press ✓.
The status
LED lights up
green on the
left.
The status
LEDs light up
red.
The admin code was
not recognized.
Repeat the procedure
beginning at step 1.
-
-
The system is in the Admin menu.
The system automatically switches back to normal mode if you do not
press a button within 10 s.