eKey Home - Page 53

52│en Usage of the finger scanner with the control panel menu
Step
Action
Description
Display
7th
Swipe the finger over the
sensor.
The status
LED lights
up green.
The status
LED lights
up red.
The quality of the fingerprint
is poor or the finger was not
recognized. Swipe the finger
over the sensor again.
-
8th
No action
required.
-
The status
LED flashes
blue.
9th
Press ESC twice to terminate
fair mode and return to the
main menu.
1 point
flashes on
the left.
Fair mode has been executed. The fingers stored while in fair mode have
been deleted. The system displays the main menu.