eKey Home - Page 58

Usage of the code pad with shortcuts en│57
Step
Action
Description
Display
6th
Press ✓.
The status
LEDs light up
yellow on the
left and green
on the right.
The status
LEDs light up
red.
The desired admin
code has already
been assigned as a
user code. Enter the
admin code from the
beginning again.
-
-
7th
Enter the new admin
code again on the
keypad.
-
-
8th
Press ✓.
The status
LEDs light up
green.
The status
LEDs light up
red.
The two entries do
not match. The new
admin code was not
saved. Enter the
admin code from the
beginning again.
-
-
The two entries do
not match. The new
admin code was not
saved. Enter the
admin code from the
beginning again.
-
-
9th
No action
required.
-
The status
LEDs are off.
The new admin code is saved. The system is in normal mode.