Electroline Control Unit IV - Logging off a Session

Control Unit IV Reference Manual Setup
529-0004 Ver.3 3-5
3. Type
help
or
?
and press <Enter> to display the command menu.
CU4>help
Terminal Protocol
info Show system info
time [hh:mm:ss] Read [set] time
date [wkday-mth-day-yr] Read [set] date (Sun=1 & 2000=00)
chkram Verify status RAM *
tap <g,t> Read a tap status
grp <g[,ng]> Read entire group[s] status *
find <status g[,ng]> Find occurrences of specified status *
locate <g> Identify tap when off or basic *
search <g> Identify tap when off, basic or pay *
stap <status g,t> Set a status for a specified tap
sgrp <status g[,ng]> Set group[s] to specified status *
sendgrp <g> Refresh group
setseq <g> Set sequencer to specified group
download <g,ng> Download status of specified groups *
upload Upload status *
sync Synchronize databases *
setup Enter configuration mode *
logoff Return to normal user access
setpw <oldpw newpw> Change system password
reset Software reset
* Use of these functions may cause a delay on other ports.
3.3.3 Logging off a session
To log off a session or to change from a full-access level to a limited-access level:
1. Press <Enter> to display the CU4> prompt.
2. Type
logoff
and press <Enter>. The message System logoff will appear.
C
ommands
r
equiring a
p
assword