Control Unit IV Reference Manual
vi 529-0004 Ver.3
About this manual
This reference manual contains all the procedures for installing, setting up, operating,
maintaining and troubleshooting the Control Unit IV. In this manual, the term Control Unit
refers to the Control Unit IV, unless otherwise specified.
This section outlines the manual’s structure and sets out the typographical conventions used
throughout this manual. There are six chapters:
Chapter 1:
Product Description
Overview of the Control Unit and its various roles. Also
includes a detailed physical description of the Control Unit.
Chapter 2:
Installation
Overview of the various setups and steps for installing the
Control Unit. Provides cautions and tips for handling the
equipment.
Chapter 3:
Setup
User information for setting up the Control Unit. Explains in
detail the various functions the Control Unit offers, illustrated
with practical examples. Includes redundancy system setup
procedures.
Chapter 4:
Subscriber Statuses
Procedures for setting the subscriber statuses manually from a
terminal connected to the Control Unit.
Chapter 5:
Maintenance
Procedures for performing minor hardware maintenance and
upgrades, software upgrades, data uploads and downloads and
verifying the Control Unit’s operation.
Chapter 6:
Troubleshooting
Description of problems that may occur while connecting,
setting up and operating the Control Unit, with solutions for
correcting the problem.
A glossary, a description of cable assemblies and an index are included at the end of the
manual for reference purposes.
To Next Page
Loading...