connect by using the Auxiliary Power Supply:
No replaceable fuse
protection!
Do not allow significant
overvoltage!
The 48VDC power supply
should be isolated from
the mains by double or
reinforced insulation
On the Front Panel connect the female end of the
Auxiliary Cable to the Auxiliary Port of the unit to the
corresponding +/- connection:
On the Front Panel turn on the Main Power Supply
Switch to the ON position:
Verify that the unit is running on Auxiliary Power by using the status indicator lights:
Main Auxiliary Power Applied,
Battery Charging
Main Auxiliary Power Applied,
Battery Fully Charged
To Next Page
