Emerson DL8000 - Page 286

DL8000 Preset Instruction Manual
E-68 DL8000 Keypad Display Revised February-2016
 Disables Auto select recipe [64,0,5] (This occurs as soon as you
select the Product Calibration option)
Switching from
Program Mode to
Loading Mode
After you complete the configuration, the preset automatically switches
from program mode to loading mode. In loading mode, the preset
automatically selects recipe 1 and then displays the Enter Preset
Quantity screen:
 14/02/12 13:58:59
Enter Preset
Quantity
ENTER to Continue
EXIT To Go Back
Recipe 1
[ 1000 ]
Gal
Enter a preset quantity and press ENTER. The Loading screen displays.
As with normal batching, press START to start the batch.
 14/02/12 13:58:59
Loaded:
0
Gal
(Start to Load)
Recipe #1
Corrected: 60 deg F
Temp: 20
Vol Units: Gal
Gross: 0
Net: 0
(STOP to abort)
Press STOP to abort the loading process and redisplay the Enter Preset
Quantity screen.
If you enter an invalid value on the Enter Present Quantity screen, the
system displays an error message:

14/03/12 12:26:02
Invalid Preset…
(Info Message)
(Press CLEAR)
Press CLEAR to redisplay the Enter Preset Quantity screen.
If the preset quantity is valid, the following screen displays after you
press START: