Emerson DSM314 - Page 326

User Manual Chapter 13
GFK-1742F Jan 2020
Local Logic Variables 315
Local Logic Variable Name
Attribute
Size
UnAdjusted_Strobe1_Position_Cts_2
Read Only
32 Bits
UnAdjusted_Strobe2_Position_Cts_2
Read Only
32 Bits
Axis_OK_2
Read Only
Bit Operand
Position_Valid_2
Read Only
Bit Operand
Strobe1_Flag_2
Read Only
Bit Operand
Strobe2_Flag_2
Read Only
Bit Operand
Drive_Enabled_2
Read Only
Bit Operand
Program_Active_2
Read Only
Bit Operand
Moving_2
Read Only
Bit Operand
In_Zone_2
Read Only
Bit Operand
Position_Error_Limit_2
Read Only
Bit Operand
Torque_Limited_2
Read Only
Bit Operand
Servo_Ready_2
Read Only
Bit Operand
Follower_Enabled_2
Read Only
Bit Operand
Follower_Velocity_Limit_2
Read Only
Bit Operand
Follower_Ramp_Active_2
Read Only
Bit Operand
Note:
1. These Digital Outputs must be configured for Local Logic control in Hardware Configuration in
order to be write-able by Local Logic.
2. The Position_Increment_Cnts_n variable has a maximum range of ±1023 counts.