User Manual Chapter 13
GFK-1742F Jan 2020
Local Logic Variables 317
Table 68: Axis 4 Variables
Local Logic Variable Name
* These Digital Outputs must be configured for Local Logic control in Hardware Configuration,
in order to be writeable by Local Logic.
Note: For Axis 4, the DSM314 Version 2.0 only supports the variables in Table 68.
Table 69: Global Variables
Local Logic Variable Name
New_Configuration_Received
First_Local_Logic_Sweep
(1)
Note:
1. Refer to the Section on “Local Logic System Variables”.
2. Refer to the Section on “Local Logic User Data Table”.
3. The CTL_1_to_32 variable can be used to read all 32 CTL bits into a register.
4. Refer to the Section on ”Double Precision 64 Bit Registers”.
To Next Page
Loading...
