User Manual Chapter 3
GFK-1742F Jan 2020
Installing and Wiring the DSM314 62
Converting From DIN-Rail Mounting to Panel Mounting
The following parts are used in either the DIN-rail or Panel mount assembly options. The
auxiliary terminal board is shipped configured for DIN-rail mounting. The instructions in this
section guide you in converting the board to its panel mounting optional configuration.
The following table and drawings describe the various plastic parts that make up the
auxiliary terminal board assembly and shows a side view of the board configured for DIN-
rail mounting.
Table 18: Auxiliary Terminal Board Components
To Next Page
Loading...
