Endress+Hauser MODBUS RS485 - Page 129

Proline Promag 53 MODBUS RS485 Technical data
Endress+Hauser 129
Material Promag W
• Transmitter housing:
– Housing for compact version: powder-coated die-cast aluminum
– Wall-mount housing: powder-coated die-cast aluminum
•Sensor housing
– DN 25 to 300: powder-coated die-cast aluminum
– DN 350 to 2000: with protective coating
•Measuring tube
–DN ≤ 300: stainless steel 1.4301 or 1.4306/304L
for flanges made of carbon steel with Al/Zn protective coating
–DN ≥ 350: stainless steel 1.4301 or 1.4306/304
for flanges made of carbon steel with protective coating
• Electrodes: 1.4435, Alloy C-22, tantalum
• Flanges
– EN 1092-1 (DIN2501): 1.4571/316L; RSt37-2 (S235JRG2); C22; FE 410W B
(DN ≤ 300: with Al/Zn protective coating; DN ≥ 350 with protective coating)
– ANSI: A105; F316L
(DN ≤ 300 with Al/Zn protective coating; DN ≥ 350 with protective coating)
– AWWA: 1.0425
– JIS: RSt37-2 (S235JRG2); HII; 1.0425/316L
(DN ≤ 300 with Al/Zn protective coating; DN ≥ 350 with protective coating)
– AS 2129
– (DN 150, 200, 250, 300, 600) A105 or RSt37-2 (S235JRG2)
– (DN 80, 100, 350, 400, 500) A105 or St44-2 (S275JR)
– AS 4087: A105 or St44-2 (S275JR)
• Seals: as per DIN EN 1514-1
• Ground disks: 1.4435/316L, Alloy C-22, titanium, tantalum
Promag P
• Transmitter housing:
– Compact housing: powder-coated die-cast aluminum
– Wall-mount housing: powder-coated die-cast aluminum
•Sensor housing
– DN 15 to 300: powder-coated die-cast aluminum
– DN 350 to 2000: with protective coating
•Measuring tube
–DN ≤ 300: stainless steel 1.4301 or 1.4306/304L
for flanges made of carbon steel with protective coating
–DN ≥ 350: stainless steel 1.4301 or 1.4306/304
for flanges made of carbon steel with protective coating
• Electrodes: 1.4435; Alloy C-22; titanium; tantalum; platinum
• Flanges
– EN 1092-1 (DIN2501): 1.4571/316L; RSt37-2 (S235JRG2); C22; FE 410W B
(DN ≤ 300: with Al/Zn protective coating; DN ≥ 350 with protective coating)
– ANSI: A105; F316L
(DN ≤ 300 with Al/Zn protective coating; DN ≥ 350 with protective coating)
– AWWA: 1.0425
– JIS: RSt37-2 (S235JRG2); HII; 1.0425/316L
(DN ≤ 300 with Al/Zn protective coating; DN ≥ 350 with protective coating)
– AS 2129
– (DN 25) A105 or RSt37-2 (S235JRG2)
– (DN 40) A105 or St44-2 (S275JR)
– AS 4087: A105 or St44-2 (S275JR)