Endress+Hauser Proline Promag 10 - Terminal Assignment

PROline Promag 10 4 Wiring
Endress+Hauser 41
4.2.2 Terminal assignment
!
Note!
Wiring as per wiring diagram Fig. 27, Page 40
Terminal No. (outputs)
Order variant 24 (+) / 25 (–) 26 (+) / 27 (–)
10***-***********A
Pulse output Current output
HART
Pulse output (passive)
Open collector, galvanically isolated
30 V DC, 250 mA
Pulse mode of operation: pulse frequency max. 100 Hz
Status mode of operation: yes, can be configured
Current output (active)
Galvanically isolated, active: 4...20 mA, R
L
< 700 Ω, HART: R
L
≥ 250 Ω
Ground connection, power supply → Page 40 ff.