PROline Promag 10 2 Identification
Endress+Hauser 7
2 Identification
2.1 Device designation
The “Promag 10” flowmeter system consists of the following components:
• Promag 10 transmitter
• Promag W, Promag P or Promag H sensors
In the compact version, the transmitter and sensor form a single mechanical unit; in the
remote version they are installed separately.
2.1.1 Nameplate of the transmitter
Fig. 1: Nameplate specifications for the “Promag 10” transmitter (example)
1 Ordering code /serial number: see the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Power supply / frequency: 11...40 V DC / 20...28 V AC
Power consumption: 6W/8VA
3 Additional information:
– EPD/MSU: with Empty Pipe Detection
4 Available outputs:
I-OUT (HART): with current output (HART)
PULSE-OUT: with pulse/status output
5 Permitted ambient temperature range
6 Degree of protection
PROMAG
ENDRESS+HAUSER
Order Code:
10
Ser.No.:
TAG No.:
11-40VDC/20-28VAC
50-60Hz
EPD / MSU
I-OUT (HART), PULSE-OUT
Pat. US 5,323,156 5,479,007
Pat. US 4,382,387 4,704,908 5,351,554
8VA/6W
IP67/NEMA/Type4XXXXXX-XXXXXXXXXXXX
12345678901
ABCDEFGHJKLMNPQRST
–20°C (–4°F) < Tamb < +60°C (+140°F)
i
1
6
2
3
4
5
F06-10xxxxxx-18-06-xx-xx-000
To Next Page
Loading...
