PROline Promag 10 2 Identification
Endress+Hauser 9
2.2 CE mark, declaration of conformity
The devices are designed to meet state-of-the-art safety requirements in accordance
with sound engineering practice. They have been tested and left the factory in a
condition in which they are safe to operate. The devices comply with the applicable
standards and regulations in accordance with EN 61010 “Protection Measures for
Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.”
The measuring system described in these Operating Instructions thus complies with the
statutory requirements of the EC Directives. Endress+Hauser confirms successful
testing of the device by affixing to it the CE mark.
2.3 Registered trademarks
KALREZ
®
, VITON
®
and TEFLON
®
Registered trademarks of E.I. Du Pont de Nemours & Co., Wilmington, USA
TRI-CLAMP
®
Registered trademark of Ladish & Co., Inc., Kenosha, USA
HART
®
Registered trademark of the HART Communication Foundation, Austin, USA
FieldTool ™, FieldCheck ™, Applicator ™
Registered or registration-pending trademarks of Endress+Hauser Flowtec AG,
Reinach, Switzerland
To Next Page
Loading...
