2 Identification PROline Promag 10
8 Endress+Hauser
2.1.2 Nameplate of the sensor
Fig. 2: Nameplate specifications for the “Promag” sensor (example)
1 Ordering code /serial number: see the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Calibration factor: 0.5328; zero point:
−5
3 Nominal diameter: DN 100
Pressure rating: DIN PN 16 bar
4 TMmax +80 °C (max. fluid temperature)
5 Materials:
– Lining: hard rubber
– Measuring electrodes: stainless steel 1.4435/316L
6 Additional information (examples):
– EPD/MSU: with Empty Pipe Detection electrode
– R/B: with reference electrode
– EME/AWE: with exchangeable measuring electrodes
– 0.5% CAL: with 0.5% calibration
7 Permitted ambient temperature range
8 Degree of protection
9 Reserved for additional information on device version (approvals, certificates)
10 Flow direction
i
1
2
3
4
5
6
8
9
10
7
ABCDEFGHJKLMNPQRSTTAG No.:
Pat. UK EP 219 725 EP 521169
Pat. UK EP 541 878 EP 618 680
IP67/NEMA/Type4X
HG / 1.4435
0.5328 / –5
TMmax.: 80°C
EPD/MSU R/B 0.5% CAL
DN100 DIN PN 16
K-factor:
Materials:
ENDRESS+HAUSER
12345678901
XXXXX-XXXXXXXXXXXX
PROMAG
Order Code:
Ser.No.:
X
–20°C (–4°F) < Tamb < +60°C+140°F
F06-xxxxxxxx-18-05-xx-xx-003
To Next Page
Loading...
