Endress+Hauser Proline Promag W 800 - Page 19

Proline Promag W 800 Storage and transport
Endress+Hauser 19
4 → 5 →
1. 2.
A0046666 A0046671
‣
Take the battery out of the battery compartment (it is still attached,
however) and disconnect the battery plug.
‣
Now remove the battery from
the battery compartment
entirely.
6 → 7 →
A B
3.
2.
1.
A0046591 A0046733
‣
Set switch "B" to "OFF".
‣
Insert the battery plug and place the cable in the recess of the battery
carrier as shown in the graphic. Place the battery in the battery
compartment.
8 → 9 →
A0046744 A0046727
‣
Close the cover of the
electronics carrier.
‣
Fit the cover on the transmitter
housing.
10 →
¼
1.
2.
A0046655
‣
Turn the cover to the right by a 1/4 turn.