Accessories Proline Promag W 800
94 Endress+Hauser
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1 For the Proline 800 transmitter - Standard
Accessories Description
Ground cable Set, consisting of two ground cables for potential equalization.
Display guard Is used to protect the display against impact or scoring, for example from sand in
desert areas.
Order number: 71504534
Cable set, Modbus, 3x
pulse, 5m/15ft
Order number: 71504535
Application package,
Promag 800
Order number: DK5014
1x battery pack, lithium
Order number: DK5016-AA
15.1.2 For the Proline 800 - Advanced transmitter
Accessories Description
Connecting cable for
remote version
Coil current and electrode cables, various lengths, reinforced cables available on
request.
Ground cable Set, consisting of two ground cables for potential equalization.
Post mounting kit Post mounting kit for transmitter.
Weather protection cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.
Order number: 71343504
Installation Instructions EA01191D
Application package,
Promag 800
Order number: DK5014
1x battery pack, lithium
Order number: DK5016-CA
2x battery pack, lithium
Order number: DK5016-CB
15.1.3 For the sensor
Accessories Description
Ground disks Are used to ground the medium in lined measuring tubes to ensure proper
measurement.
For details, see Installation Instructions EA00070D
To Next Page
Loading...
