Endress+Hauser Proline Promag W 800 - Adapting the measuring device to the process conditions; Performing a totalizer reset; Disabling the Bluetooth interface; Enabling the software option

Proline Promag W 800 Operation
Endress+Hauser 73
11.2 Adapting the measuring device to the process
conditions
To do so, users can choose from the following menus:
• Guidance
• Application
Detailed information on "Guidance menu" and "Application menu": Device parameters
→  120
11.3 Performing a totalizer reset
Navigation
"Application" menu → Totalizers → Totalizer handling → Reset all totalizers
Parameter overview with brief description
Parameter Description Selection
Reset all totalizers Reset all totalizers to 0 and start. • Cancel
• Reset + totalize
11.4 Disabling the Bluetooth interface
The disabling of the interface can only be undone using Wake on Touch →  72.
Navigation
"System" menu → Connectivity → Bluetooth configuration → Bluetooth
Parameter overview with brief description
Parameter Description Selection
Bluetooth Enable or disable Bluetooth function. • Enable
• On touch
• Not available
*
* Visibility depends on order options or device settings
11.5 Enabling the software option
11.5.1 "Software configuration" submenu
Navigation
"System" menu → Software configuration
‣
Software configuration
Activate SW option
→  74
Software option overview
→  74