Endress+Hauser Proline Promag W 800 - Firmware history

Proline Promag W 800 Diagnosis and troubleshooting
Endress+Hauser 85
Navigation
"System" menu → Information → Device
Parameter overview with brief description
Parameter Description User interface
Serial number Shows the serial number of the measuring device. Character string comprising numbers, letters
and special characters
Order code Shows the device order code. Character string comprising numbers, letters
and special characters
Firmware version Shows the device firmware version installed. Character string comprising numbers, letters
and special characters
Extended order code 1 Shows the 1st part of the extended order code. Character string comprising numbers, letters
and special characters
Extended order code 2 Shows the 2nd part of the extended order code. Character string comprising numbers, letters
and special characters
Extended order code 3 Shows the 3rd part of the extended order code. Character string comprising numbers, letters
and special characters
Device name Shows the name of the transmitter. Character string comprising numbers, letters
and special characters
ENP version Shows the version of the electronic nameplate (ENP). Character string comprising numbers, letters
and special characters
Manufacturer Displays the manufacturer. Character string comprising numbers, letters
and special characters
12.10 Firmware history
Release
date
Firmware
version
Firmware
Changes
Documentation type Documentation
03.2021 01.00.zz Original firmware Operating
instructions
BA02081D/06/EN/01.21