Endress+Hauser Proline Promag W 800 - Storage and transport; Storage conditions; Storing the device

Storage and transport Proline Promag W 800
18 Endress+Hauser
5 Storage and transport
5.1 Storage conditions
Observe the following notes for storage:
‣
Store in the original packaging to ensure protection from shock.
‣
Do not remove protective covers or protective caps installed on process connections.
They prevent mechanical damage to the sealing surfaces and contamination in the
measuring tube.
‣
Protect from direct sunlight. Avoid unacceptably high surface temperatures.
‣
Select a storage location that excludes the possibility of condensation forming on the
measuring device. Fungi and bacteria can damage the liner.
‣
Store in a dry and dust-free place.
‣
Do not store outdoors.
Storage temperature →  105
L
WARNING
Batteries may explode if not handled properly!
‣
Do not recharge batteries.
‣
Do not open batteries.
‣
Do not expose batteries to naked flame.
5.2 Storing the device
5.2.1 Proline Promag 800 - Standard
1 → 2 →
¼
1.
2.
A0046655 A0046656
‣
Turn the cover to the right by a 1/4 turn.
‣
Lift off the cover.
3 →
1.
2.
A0046658
‣
Open the cover of the electronics carrier.